另外本廠生產的計算機控制塑料滑動摩擦試驗機是在現有電子塑料滑動摩擦試驗機的基礎上又增加了很多試驗功能，可以同時顯示扭矩-時間曲線，隨意設定試驗次數，顯示當前試驗次數，
適用于塑料制品、橡膠制品、石墨板材或其他復合材料的滑動摩擦，磨損性能測試，也可對試驗中試樣的磨擦力、磨擦系數和磨損量進行測定。也可對試驗中試樣的磨擦力、磨擦系數和磨損量進行測定。
本機采用扭矩傳感器，16 位單片機電子處理系統，使得本儀器各項測試指標精度非常高。由于集成程度很高，所以設備本身的穩定性，本機具有一次設置，全自動運行，實驗結束后自動停機，
本儀器融合了當前新的智能電路系統進行控制，并結合老式M-200摩擦磨損試驗機的功能進行升級改造而成，本儀器具有測控精度高，操作便捷等，是科研院所、質檢機構、實驗室研究的試驗設備。
M-200型摩擦磨損試驗機主要由試驗主機及智能控制系統兩大部分構成，通過微機控制系統進行操作試驗，在試驗過程中同時可以顯示數值、扭矩、時間曲線，并可以隨意設定試驗次數，顯示當前試驗數值，
12、整機重量：約87 公斤
M-200 rubber plastic sliding friction and wear testing machine (computer control)
Applicable scope and function
Meet the standard: 3960-1983 GB/T plastic sliding friction and wear test method 9141.8-1999 GB/T flexible graphite sheet sliding friction coefficient test method
In addition to the production plant computer control plastic sliding friction testing machine is on the basis of the existing electronic plastic sliding friction testing machine and increase the many test functions, can also display the torque time curve arbitrarily set the number of trials, displays the current number of tests,
Setting time and the test time and other functions, the machine with color printer, print out with a curve, data table, exquisite test report test unit, the name of the first single.
Suitable for sliding friction and wear properties of plastic products, rubber products, graphite sheets or other composite materials, and can also be used to determine the friction force, friction coefficient and wear of test specimens. The friction force, friction coefficient and wear rate of the samples can be measured in the test.
This machine adopts the high precision torque sensor, 16 bit single chip microcomputer electronic processing system, makes this instrument each test target precision is very high. Because the integration level is very high, so the stability of the equipment itself is excellent, the machine has a set, automatic operation, automatic shutdown after the end of the experiment,
And the degree of wear and tear, and through the printer to print test data and other functions. It is a necessary testing equipment for all scientific research institutes, universities and enterprises.
Scientific research institutions, quality inspection institutions and laboratories and study is the preferred test equipment and the instrument fusion of the latest intelligent circuit system control, and combined with the old M-200 friction wear testing machine, function upgrading and. The instrument has high control accuracy, convenient operation and other advantages.
M-200 friction wear testing machine is mainly composed of the host and the intelligent control system consists of two parts, through the microcomputer control system for testing operations, in the test process also can display the numerical, torque and time curve, and can be arbitrarily set the number of trials and display the current test data,
Setting time and the current test time and other functions, random equipped with color printer, you can print out with the curve, form data, such as the standard requirements of the test report.
Two, product parameters and accuracy:
1, sample size: 30mm * 7mm * 6mm
2, the speed of rotation: 0-500 (adjustable)
3, load: 196N + 0.1% (can be increased to 392N)
4, the friction ring of size: 40 x 10mm, 0.5 x 45 degree chamfer, surface of the outer circle and inner circle concentricity deviation is less than 0.01
5, the friction ring material: 45 steel, quenching, heat treatment of HRC40-45, the outer circle surface finish size 8
6, friction torque: M / 0--4N
7, weight weight: 4KG weight of one, 1KG weight 4 pieces, can achieve weight superposition function.
8, speed accuracy: 1%
9, load accuracy: 0.5%
10, friction torque accuracy: 1%
11, counter accuracy: 1S
12, sensor measurement accuracy: 1% FS
Three, the main configuration and accessories: (computer control)
1, a test host
2, high precision torque sensor
3, a computer data acquisition card
4, a computer (brand)
5, color laser inkjet printer
6, computer control software set
7, 4Kg weight two (spare one set)
8, standard friction ring four (spare two)
9, a copy of the instructions of the product
10, product qualification certificate
11, product packing list
12, the weight of the whole machine: a
bout 87 kg
免責聲明：以上所展示的[M-200 橡膠塑料滑動摩擦磨損試驗機]信息由會員[北京中航鼎力儀器設備有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
